Simplicity 6010 Bedienungsanleitung PDF herunterladen

 2 x 125 MHz independent input channels

 Optional Frequency Measurement to 1.3 GHz

 Standard TCXO stability Oscillator

 Optional high-stability Oscillator

 Bright 9 digits display; visible at any lighting condition

 Resolves frequency resolution to 8 digits in one

second of gate time (with option 1)

 10ps averaged time interval resolution (with option 1)

 10 storable front panel set-ups

 Complete input conditioning on both channels,

with internal 50W, attenuators, low-pass filters, and

slope selection

 13 automatic measurements, including peak signal

amplitude

 50 built-in gate time intervals plus an external input,

extend gate time range from 100µS to 1000s

 Standard GPIB interface

Tabor`s Model 6010 is a high performance,

2-channel,125MHz Universal Counter/Timer for

applications from R&D benchtop to Automatic Test

Equipment. The module offers nine automatic

measurement functions and has an optional

1.3GHz third input available for RF requirements.

Model 6010 offers outstanding frequency range

and high resolution along with numerous special

features and capabilities built-in to this optimal

Counter/Timer. In short, there is simply no

comparable instrument on the market for such a

cost-effective price.

Extremely user-friendly operation

Design approach emphasizes simplicity of

operation. Numerous functions, parameters and

operating modes resolved to simple, logical blocks

and one keystroke operation. In fact, operation is

so easy that first time users rarely require an

Instruction Manual.A.T.E. EnvironmentUnusually

flexible software package. With simple commands

one can adapt handshake, commands and

termination to designated controller.

High reliability

Each Tabor instrument is aged for at least two

weeks and subsequently 100% computerized

tested before shipping.

www.taborelec.com

Versatility

Model 6010 is virtually a self-contained automatic

test system. A non-volatile memory is capable of

storing up to 10 various front panel set-ups; each

dedicated to a different test procedure. Recalling

a specific set-up or accessing a few set-ups is

performed with pushbutton ease.

High performance trigger

In manual mode, the trigger level is programmable

from -5.1V to + 5.1V (-51V to + 51V in X10 mode)

with an exceptional resolution of 10 mV (100mV

in X10 mode). An automatic trigger mode is also

available covering the frequencies from 100Hz

to 150MHz.

Automatic attenuation selection

Auto trigger mode automatically switches attenuator

settings if the input signal exceeds 5.1Vpk-pk.

DVM Measurements

Automatic triggering is used to establish the peak

voltages for setting trigger points. This feature is

used to measure peak voltage levels.

Individual channel filtering

The 6010 has an independent 100kHz low pass

filter on each channel to reduce input stage

sensitivity when making low-frequency

measurements.

High stability time base

Counter measurement stability can be improved

by using an external clock or one of the two

optional internal high stability time bases. The

internal time base options are:

 TCXO: Standard

 OCXO: Option 1a

 Rubidium: Option 4

Optional analog output

Option 3 (Analog Output) provides a high accuracy

source to drive devices like chart recorders. This

option is especially useful in measuring and recording

the aging and temperature stability of devices like

oscillators and Voltage to Frequency (V-F) converters.

Flexible Gate Time and Delay Time Control

The Model 6010 allows fine control of gate time and

delay time settings with 46 pre-defined times ranging

from 100ms to 10s. In addition, gate or delay may

be set to any value between 100ms and 1000

seconds using an external input.

125MHz

Universal

Counter/Timer

MODEL 6010

1 2 3 4 5 6

Inhaltsverzeichnis

Seite 1 - MODEL 6010

 2 x 125 MHz independent input channels Optional Frequency Measurement to 1.3 GHz Standard TCXO stability Oscillator Optional high-stability Oscil

Seite 2 - Counter/Timer

www.taborelec.comModel 6010125MHzUniversalCounter/TimerService and SupportBeyond providing precision Test &Measurement instruments, Tabor Elec

Seite 3 - Model 6010Specification

CONVENTIONAL FREQUENCYMEASUREMENT CHARACTERISTICSRange: 10MHz to 125MHzwith option 1: 100MHz to 125MHzLSD(1) Displayed: 4

Seite 4

TIME INTERVAL A TO B - AVERAGED (*)T.I A to B Range: 0ns to 10s. A and B signals must have the samerepetition rate.LSD(1) Displayed: 5 x 100ns ÖNw

Seite 5

EXTERNAL ARMING (TRIGGER)Operation: Arms the instrument when setto HOLD mode.Trigger Delay(5): < 50µsMinimumPulse width: 10µsEXTERNAL INPUT - GAT

Seite 6

OPTION 3 - ANALOG OUTPUTOperation: Digital to analog converter, provides a high resolution analog output of any three consecutive digitsDecade conver

Kommentare zu diesen Handbüchern

Keine Kommentare

Simplicity 6010 Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Rasenmäher Simplicity 6010 herunter. MODEL 6010 - ELSTAR Elektronik AG Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Rasenmäher Simplicity 6010