Simplicity Serge Pro SW432 Bedienerhandbuch PDF herunterladen (Seite 15)

Left Needle

Looper Thread Fine-Tuning Screw

Needle

Threader

selector

Needle Threader

lever

No adjustments are needed when sewing with most fabrics and

threads on your Baby Lock Imagine Wave, but certain threads or

fabrics may require minor fine-tuning of the looper delivery system

to perfect your stitches. Increase or decrease the delivery of the

looper threads with the upper and lower looper thread fine-tuning

screw. With a screwdriver (found in accessory kit), turn the fine-tun-

ing screw clockwise to tighten the looper threads equally. Turn the

screw counter-clockwise to loosen the looper threads equally.

Ideal Stitch

Looper threads are

too loose.

Looper threads are

too tight.

Standard Position

Tighten the screw ( + )

Loosen the screw ( - )

1. Turn the handwheel to line up the green marks on the machine and handwheel. Set the needle

threader selector on "L" for left needle.

2. Place the thread on the far-left spool pin on the thread stand (fig.A page 12). Thread needle thread

guides A and B, through the groove on the face plate and through guides C, D, E, F and G.

3. Lower the presser foot and thread the left needle as in steps 4 and 5, under "Right Needle" on page

12.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 53 54

Keine Kommentare

Simplicity Serge Pro SW432 Bedienerhandbuch Seite 15